1.1191 CK45 Cast Iron Low Carbon Steel Bar 1045 25mm For Construction

Carbon steel is an alloy with carbon and iron, with carbon content up to 2.1% by weight. The increase in the carbon percentage will raise steel’s hardness and strength, but it will be less ductile. Carbon steel has good properties in hardness and strength, and it is less expensive than other steels.

The carbon rod is a non-metallic product. As a necessary cutting consumable before welding in the carbon arc gouging cutting process, it is made of carbon and graphite with appropriate binders, formed by extrusion, and baked at 2200℃. It is made by plating a layer of copper after the section. It has high temperature resistance, good electrical conductivity, and is not easy to break. It is suitable for cutting metal into a shape that meets the requirements.

It is a heat-treatable steel, which contains at least 0.9% Cr and 0.15% Mo as strengthening elements. After quenching and tempering, it has high strength, good low-temperature impact toughness, and a typical tensile strength of 900 -1200 N/mm2. 1.7225 steel has better performance than 34CrMo4 steel due to its higher carbon and chromium content. Similar to AISI 4140, there is little difference in Mn and Cr content. The material also has good workability and good wear resistance, but the temper brittleness is not obvious, and the weldability is poor. It can be used for static and dynamic stressed parts of vehicles, engines and machines. For parts with larger cross-sections, crankshafts, gears. It can also produce mining spare parts, induction hardening pins, fastener accessories, oil and gas drilling equipment.

Q:What is the difference between steel and carbon steel?

A:Though they have the same basic composition of iron and carbon, steel types tend to have a variety of alloying elements. Carbon steel tends to have under 10.5% chromium content, but steel must be at least 10.5% chromium to be considered stainless.